List of specifications and models for plywood hot press machines
As an important equipment in the wood processing industry, plywood hot press machines have a wide range of specifications and models, each of which is suitable for different production needs and process requirements. The common specifications and models of plywood hot press machines help everyone better understand and choose equipment that suits their own needs.
1、 Classified by structure
Single layer hot press machine: suitable for small-scale production or experimental production, with uniform pressure and simple operation.
Multi layer hot press machine: capable of processing multiple sheets simultaneously, improving production efficiency, widely used in large-scale production.
Continuous hot press machine: suitable for continuous production, the board automatically enters the hot pressing zone on the conveyor belt, and automatically outputs after hot pressing, with extremely high production efficiency.
Offline hot press machine: usually used for hot pressing treatment of special plates, such as thick plates, irregular plates, etc.
2、 Classified by heating method
Electric heating hot press: heated by electric heating elements, with precise temperature control, suitable for production of various scales.
Steam heated hot press: using steam for heating, with high thermal efficiency, but relatively complex temperature control.
Thermal oil heating hot press: using thermal oil for heating, with uniform temperature, suitable for large-scale production.
3、 Classified by pressure level
Small hot press machine: The pressure is generally below 100 tons, suitable for small-scale production or experimental production.
Medium sized hot press machine: with a pressure between 100 tons and 500 tons, suitable for medium scale production.
Large hot press machine: With a pressure exceeding 500 tons, it is suitable for large-scale production and can process multiple sheets simultaneously.
4、 Common models and parameters
YGH-180B type: pressure of 180 tons, using hydraulic lifting, easy to operate. The heating method is electric heating, with a temperature range of room temperature to 250 ℃ and a pressure plate size of 500mm × 500mm.
SDYJ-03 type: pressure of 100 tons, suitable for studying the properties, structure, and application range of various wooden materials. The heating method is electric heating, with a temperature range of room temperature to 250 ℃, and a pressure plate size of 400mm × 400mm.
SLSYJ-02 type: also with a pressure of 100 tons, suitable for research and testing of various types of boards such as wood laminates and artificial boards. The heating method and temperature range are the same as those of SDYJ-03 type.
5、 Purchase suggestions
When choosing a plywood hot press, comprehensive consideration should be given to factors such as production needs, process requirements, and budget. At the same time, it is important to choose equipment produced by reputable manufacturers to ensure the quality and after-sales service of the equipment.
There are various specifications and models of plywood hot press machines, each with its unique advantages and applicable range. I hope this article can help readers better understand and choose equipment that suits their own needs, and contribute to the development of the wood processing industry.
