How does a new hand quickly master the operation of single-board leather spinning machine
For the novice, quickly master the operation of single-board leather spinning machine should be gradual and pay attention to safety and details.
Step 1: Get familiar with equipment structure. Before operation, first understand the key components of the spinning machine, such as feed inlet, rotary cutter, transmission system, discharge outlet, etc., and define the functions of each part, which can help you quickly locate the problems in the operation.
Step 2: Do a good job in safety protection. Wear protective gloves, goggles and other equipment to avoid injuries caused by flying wood chips. Check whether there is debris around the equipment before startup to ensure that the emergency brake device is sensitive and effective.
Step 3: Standardize the operation process. Place the log stably at the feed inlet, adjust the feed of the rotary cutter according to the diameter of the wood, and gradually increase the rotary cutting speed following the principle of "slow first and then fast". Keep hands away from the cutting edge during operation and use the pusher bar to assist in feeding.
Step 4: Key quality control points. Observe closely whether the thickness of the single plate is uniform, and adjust the cutter distance and pressure in time. In case of veneer fracture, large thickness deviation and other problems, immediately shut down the machine to check whether the cutter wear or wood moisture content is appropriate.
The novice also needs to consult with the experienced master, combined with the actual operation repeated practice, generally 1-2 weeks can be skilled, safe and efficient to complete the single-board rotary cutting task.
