Industry standard for new lime kiln manufacturers
The continuous development of the lime production industry requires the establishment of industry standards for new lime kiln manufacturers, which not only concerns product quality and production efficiency, but also has significant implications for environmental protection and sustainable development of the industry.
Production technology standards
The new lime kiln needs to have efficient and energy-saving technology. Advanced combustion technologies such as high-efficiency burners and fluidized bed technology should be adopted to improve combustion efficiency, reduce fuel consumption, and decrease carbon dioxide emissions. In terms of heat transfer, it is necessary to optimize the heat transfer structure to ensure efficient heat utilization and reduce energy waste. At the same time, advanced temperature monitoring and control systems are equipped to accurately control the temperature of limestone decomposition reaction, ensuring production quality.
Product Quality Standards
The products produced by the new lime kiln must meet strict quality requirements. The calcium oxide content should reach a high level, and the general standard for quicklime calcium oxide content should be above 97%. The raw burning rate should be less than 10%, the activity level should be above 300ml, and the content of harmful components such as silicon dioxide and magnesium oxide should be strictly controlled to ensure stable and reliable product quality and meet the needs of different industries.
Environmental standards
With increasingly strict environmental requirements, new lime kilns must comply with low emission designs. The particulate matter emitted from gas fired lime kilns is less than 20mg/m ³, and the particulate matter emitted from coal fired lime kilns is less than 30mg/m ³; The emission of sulfur dioxide from exhaust gas is less than 200mg/m ³, the emission of nitrogen oxides is less than 200mg/m ³, and the emission of ammonia is less than 8mg/m ³. At the same time, exhaust gas treatment equipment such as cyclone dust collectors, bag filters, etc. should be installed to effectively purify exhaust gas and reduce environmental pollution.
safety standards
The new lime kiln should have complete safety devices, such as protective covers, safety valves, alarm devices, etc., to ensure the safety of personnel and equipment during equipment operation. The electrical system must comply with safety standards, have good insulation performance, and reliable grounding protection.
The formulation of industry standards for new lime kiln manufacturers requires comprehensive consideration of multiple factors such as production technology, product quality, environmental protection, and safety. By implementing strict standards and regulations, we aim to promote the healthy development of the new lime kiln industry and achieve a win-win situation for both economic and environmental benefits.
