Precautions for using veneer rotary cutting machine
The veneer rotary cutting machine is a key equipment in wood processing. To ensure personnel safety and stable operation of the equipment, the following precautions must be strictly followed during operation:
1、 Preparation before operation
Safety protection inspection: Confirm that all protective covers, baffles, etc. are intact and installed in place, and that the emergency stop button is functioning properly.
Equipment status confirmation: Check whether the clearance between the knife door, the sharpness of the blade, the transmission system, and the hydraulic device are in good condition.
Wood section preparation: Ensure that the wood section to be processed has been fully cooked and softened, and remove any internal metal objects (such as stones and nails) to prevent serious damage to the cutting tool.
2、 Standardization during operation
Standardized operation: It must be operated by trained and qualified personnel. It is strictly prohibited to wear gloves or loose clothing, and no part of the body should be close to rotating parts.
Concentrate attention: closely observe the rotary cutting process. If any abnormalities such as uneven thickness of the veneer, jumping or abnormal noise of the wood segments are found, the machine should be stopped immediately for investigation.
Precise adjustment: Accurately adjust the tool height, cutting angle, and feed rate according to process requirements to ensure uniform thickness and smooth surface of the veneer.
3、 Post homework maintenance
Thoroughly clean: Clean up any debris such as sawdust and tree bark inside and outside the equipment in a timely manner after shutdown to keep the site clean.
Regular maintenance: lubricate and maintain lubrication points according to regulations, regularly inspect and replace worn blades and key components.
Remembering safety regulations, standardizing operations, and maintaining them meticulously are the foundation for ensuring efficient production and personal safety.
