Uneven thickness of single-plate rotary cutting machine causes serious waste of plates
Artificial board processing equipment single-board rotary cutting machine is one of the core equipment, but the problem of uneven thickness of rotary cutting has long plagued enterprises. This problem not only affects the quality of plates directly, but also causes serious plate waste.
Uneven spinning thickness is usually caused by insufficient equipment accuracy, worn blades, unstable feed system or difference in log material. In the process of rotary cutting, if the thickness deviation is too large, some plates may be too thin to meet the use requirements due to insufficient strength; Some plates are too thick to meet the standard and require additional processing or direct scrap. This not only increases the consumption of raw materials, but also increases the production cost.
The plates with uneven thickness are easy to crack and deform in the subsequent processing, further reducing the yield. In order to ensure product quality, enterprises often need to screen and remove unqualified plates, which definitely increases the waste.
In order to solve this problem, enterprises need to regularly maintain the equipment to ensure that the blades are sharp, the feed system is stable, and the selection and pretreatment process of logs are optimized. At the same time, the introduction of high-precision sensors and intelligent control systems to monitor and adjust the thickness of rotary cutting in real time is also an effective way to reduce the waste of plates. Only in this way can enterprises maintain competitiveness in the fierce market competition and achieve sustainable development.
