Price and parameters of fully automatic plywood hot press machine
The fully automatic plywood hot press machine is a key equipment in plywood production, and its price and parameters vary depending on factors such as brand, model, and configuration.
In terms of price, the price range of fully automatic plywood hot press machines is relatively large. The price of small equipment is relatively low, such as some simple fully automatic plywood hot press machines, which cost around several thousand to ten thousand yuan. However, the price of large and high-performance equipment is relatively high, such as some large-sized and fully functional plywood hot press machines, which can cost hundreds of thousands of yuan. For example, Wuxi Lutong Machinery's veneer laminating machines, plywood hot press machines, and ecological board laminating machines are priced between 270000.00 and 420000.00 yuan per unit; The Yongfeng brand 15 layer plywood hot press machine directly sold by Guangzhou manufacturers is priced at 280000.00 yuan. In addition, the price of second-hand equipment will be lower than that of brand new equipment, and the price of second-hand hot press machines with good condition is generally 50% to 60% of that of new machines.
In terms of parameters, the fully automatic plywood hot press has multiple parameter indicators. In the framework section, Q235B national standard steel material is commonly used, with a steel plate thickness of 40mm and a layer spacing of 70mm. The material of the hot press plate is mostly Q345 national standard, with dimensions such as 1370 × 2700 × 52mm. Oil cylinder diameter 400mm, stroke 1050mm, quantity 2, maximum pressure 26MPa. In terms of hydraulic station, there are 2 500ml low-pressure pumps, 2 22kw low-pressure pump motors, and 25ml high-pressure pumps produced by Qidong, with a high-pressure pump motor of 11kw. The electronic control adopts SIEMENS Plc control or PLC (OMRON). Different brands and models of equipment also have differences in maximum processing width, thickness, length, and other aspects. For example, there are various specifications for maximum processing width, such as 1240mm, 1700mm, 2000mm, 2500mm, etc.
