Detailed introduction of plate chain ne50 elevator
The plate chain NE50 elevator is a vertical conveying equipment with a circular plate chain as the traction component, widely used in industries such as building materials, coal, and chemical engineering. It focuses on efficient conveying of low to medium viscosity, block or granular materials (such as cement clinker, ore, coal), and has the core advantages of stability, durability, and strong adaptability.
In terms of core parameters, the "NE50" model corresponds to key performance indicators: the designed conveying capacity is about 50m ³/h (the actual value fluctuates slightly with material density and particle size), and the lifting height is within the conventional range of 10-40m, which can be customized according to production scenarios; Adopting plate chain transmission, the chain material is mostly 20Mn2 or high-quality alloy steel, which is strengthened by heat treatment and has high tensile strength. Combined with wear-resistant scraper, it can effectively avoid material sliding and conveying loss; The driving device comes standard with a Y series three-phase asynchronous motor with a power of 5.5-11kW, paired with a hard tooth surface reducer, achieving a transmission efficiency of over 90% and operating noise below 85dB.
In terms of structural design, the equipment consists of six parts: the head, tail, middle casing, traction chain, scraper, driving device, and tensioning device. The machine head includes a discharge port and a drive sprocket, adopting an inclined discharge structure to avoid material accumulation; The tail of the machine is equipped with a tensioning mechanism that can automatically adjust the tension of the chain to reduce chain wear; The middle casing adopts a segmented design for easy installation and maintenance, and wear-resistant lining plates can be installed on the inner wall to extend the service life.
Compared to belt type elevators, the plate chain NE50 elevator has stronger temperature resistance (able to withstand high temperature materials below 150 ℃), good impact resistance, and is less likely to cause damage to the traction parts due to block shaped particles of the material; Compared to bucket elevators, its conveying channel is wider, suitable for larger particle sizes (up to 80mm), and has lower maintenance costs. It is the preferred equipment for small and medium-sized enterprises to achieve vertical material conveying.
